跳至主要内容

Double shaft paddle mixer system

The double shaft paddle blender for solids and powders, suitable for various kinds of mixing products.

The double shaft paddle mixer is provided with two shafts with counter-rotating blades, which produce two intense upward flows of product, generating a zone of weightlessness with an intense mixing effect.

Below system is two paddle mixer system. 


Paddle Mixer.jpg


When mixing the food powder products, several ingredients are combined together.

When two powders with unequal quantities are mixed, like one powder is 1%, the other powders is 99%,   small amount of powder is difficult to mix uniformly.

So it will need a small mixer to mixing the small batch first.


Step 1. Small mixer begin to mix.  small quantity 

Step 2. After the small mixer mixing,  the material will be discharge to the hopper,  and the products will be conveyed to next step by the vacuum feeder.

Step 3. Vacuum feeder convey other mixing material to mixer.

Step 4. Big mixer begin to mix


In this system,  both mixer use the double shaft paddle mixer.

Which is fast speed and good mixing effect.


Paddle Mixer.jpg

评论

发表评论

此博客中的热门博文

Why you can't directly measure the torque output of a capping machine?

As you might expect, we discuss torque with our customers every day. People certainly have a lot of questions about how to measure torque. They want to make sure that the proper torque is applied to the cap. So naturally, many people who are new to caps want to find a way to directly measure the torque output of their capping machine. The ideas they usually try are logical and well thought out, but unfortunately, they can lead to inaccurate results. Our purpose here is to explain why.   Many people understandably assume that if they put a bottle into a cap torque tester and then tighten the cap with a capper, the tester will tell them what torque the capper just applied to the cap. Unfortunately, this is not the case. If the cap is screwed onto the container very slowly, the cap torque tester will only measure the torque applied to the cap.  A capping machine  can tighten caps very quickly. The sampling rate (how often the cap torque tester reads the torque output) of the...
发表评论
阅读全文

How Do I Know When a Process Should Be Automated?

Automation can improve the efficiency, safety, accuracy and speed of a process, but it also requires careful planning. There are many factors to consider and it can be difficult to know when a process should be automated. If you are wondering about automating a process at your processing plant, manufacturing plant, or another facility, consider the following. How to Know When a Process Should be Automated 1. Current Process Time vs. Projected Process Time Time is one of the most important factors to consider when deciding whether a process should be automated or not. A machine will perform most simple and repetitive processes faster than a person can. However, it is not only the individual process itself that should be considered, but the surrounding processes as well. 2. Accuracy Requirements Accuracy is another important factor to consider when a process should be automated. If machines are installed, maintained and programmed correctly, they will perform the same task, the same way,...
发表评论
阅读全文

How Does the Powder Filling and Sealing Machine Work?

Today, we will delve into the process of packaging powder products into pre-made bags using a pouch filling and sealing machine. The  Powder Packing Machine  mainly accomplishes two things: distributing the product into prefabricated bags, and then sealing the bags. There are two main designs of this machine type: rotary and in-line. The difference between the two lies in the machine layout.                   Powder Packing Machine The rotary bag packaging machine is arranged in a circular pattern, which means that the starting point of the packaging process is right next to the end point. This creates a better ergonomic setting for the operator and requires a minimal footprint. Since they are very popular in powder packaging, we will only take a closer look at the rotary design in this article. The rotary bag filling and sealing machine can be equipped with one-bag, two-bag or four-bag feeding "channels", among which the simplex (s...
发表评论
阅读全文