Single Shaft Paddle Mixer

Single Shaft Paddle Mixer

Paddle Mixer Description

Main features

High active: Rotate reversely and throw materials to different angles, mixing time 1-3min

High uniformity: Compact design and rotated shafts be filled with hopper, mixing uniformity up to 99%

Low residue: Only 2-5mm gap between shafts and wall, open-type discharging hole

Zero leakage: Patent design and ensure the rotating axle & discharing hole w/o leakage

Full clean: Full weld and polishing process for mixing hopper, w/o any fastening piece like screw,nut.

Nice profile: the whole machine is made by 100% stainless steel to make its profile elegant except bearing seat.

More information about Dahe Packaging Machinery, please contact us.

此博客中的热门博文

Why you can't directly measure the torque output of a capping machine?

As you might expect, we discuss torque with our customers every day. People certainly have a lot of questions about how to measure torque. They want to make sure that the proper torque is applied to the cap. So naturally, many people who are new to caps want to find a way to directly measure the torque output of their capping machine. The ideas they usually try are logical and well thought out, but unfortunately, they can lead to inaccurate results. Our purpose here is to explain why. Many people understandably assume that if they put a bottle into a cap torque tester and then tighten the cap with a capper, the tester will tell them what torque the capper just applied to the cap. Unfortunately, this is not the case. If the cap is screwed onto the container very slowly, the cap torque tester will only measure the torque applied to the cap. A capping machine can tighten caps very quickly. The sampling rate (how often the cap torque tester reads the torque output) of the cap torque te

阅读全文

How Do I Know When a Process Should Be Automated?

Automation can improve the efficiency, safety, accuracy and speed of a process, but it also requires careful planning. There are many factors to consider and it can be difficult to know when a process should be automated. If you are wondering about automating a process at your processing plant, manufacturing plant, or another facility, consider the following. How to Know When a Process Should be Automated 1. Current Process Time vs. Projected Process Time Time is one of the most important factors to consider when deciding whether a process should be automated or not. A machine will perform most simple and repetitive processes faster than a person can. However, it is not only the individual process itself that should be considered, but the surrounding processes as well. 2. Accuracy Requirements Accuracy is another important factor to consider when a process should be automated. If machines are installed, maintained and programmed correctly, they will perform the same task, the same way,

阅读全文

What Problems do you Encounter When Using the Powder Packaging Machine?

Powder packaging machine can be described as a type of equipment in packaging machinery. It is aimed at products such as powders and powders. Since these products are composed of relatively fine dust, there will be some waves in the production process. Therefore, it is very important for it to make the production of powder products and reduce dust flying and other issues. So when it comes to powder packaging, what are the problems with powder packaging opportunities? As a Pouch Packing Machine Manufacturer , I would like to share with you. Coffee Powder Packing Machine After many tests of the powder packaging machine, it is found that there are some problems in the packaging of dyes. If these problems are not handled properly, it will directly affect the quality of the packaging. So if the automatic verification system is set up, will it be changed? When packaging dyes, one operator is still required to assist the equipment to complete the work together. For example, the putting of e

阅读全文

Shanghai Dahe Packaging Machinery Co., Ltd

搜索此博客