跳至主要内容

Vertical Powder Packing Machine Safe Operation

 Vertical Powder Packing Machine Safe Operation

1. Check the operating surface, conveyance belt and sealing tool carrier and make sure there is no tool or any impurity on them each time before start. Be sure there is no abnormality around the machine.

2. Protection equipment is in function position before start.

3. It is strictly forbidden to make any part of human body close to or contact with any operating part during the operation of the machine.

4. It is strictly forbidden to stretch your hand or any tool into the end sealing tool carrier during the operation of the machine.

5. It is strictly forbidden to shift the operation buttons frequently, nor to change the parameter settings frequently without any authorization during the normal operation of the machine.

6. Over speed long-term operation is strictly forbidden.

7. When the machine is operated, adjusted or repaired by several persons at the same time, such persons shall communicate with each other well. To make any operation, the operator shall first send out the signal to others. It would be best to turn off the master power switch.

8. Always inspect or repair the electric control circuit with power off. Such inspections or repairs must be done by the professional electrical personnel. As the auto program of this machine is locked, no one could modify it without any authorization.

9. It is strictly forbidden to operate, adjust or repair the machine by the operator who has not kept a clear head because of drunk or fatigue.

10. No one could modify the machine by himself without the consent of the company. Never use this machine other than the designated environment.

11. The resistances of vertical packing machine conform to the safety standard of country. But the packaging machine is started at the first time or not used for a long time, we should start heater at low temperature for 20 minutes to prevent heating parts from damping

Warning: for the safety of yourself, the others and the equipment, please follow the above requirements for operation. The company shall bear no liability for any accident caused by failure to meet the above requirements. 

评论

发表评论

此博客中的热门博文

Why you can't directly measure the torque output of a capping machine?

As you might expect, we discuss torque with our customers every day. People certainly have a lot of questions about how to measure torque. They want to make sure that the proper torque is applied to the cap. So naturally, many people who are new to caps want to find a way to directly measure the torque output of their capping machine. The ideas they usually try are logical and well thought out, but unfortunately, they can lead to inaccurate results. Our purpose here is to explain why.   Many people understandably assume that if they put a bottle into a cap torque tester and then tighten the cap with a capper, the tester will tell them what torque the capper just applied to the cap. Unfortunately, this is not the case. If the cap is screwed onto the container very slowly, the cap torque tester will only measure the torque applied to the cap.  A capping machine  can tighten caps very quickly. The sampling rate (how often the cap torque tester reads the torque output) of the...
发表评论
阅读全文

How Do I Know When a Process Should Be Automated?

Automation can improve the efficiency, safety, accuracy and speed of a process, but it also requires careful planning. There are many factors to consider and it can be difficult to know when a process should be automated. If you are wondering about automating a process at your processing plant, manufacturing plant, or another facility, consider the following. How to Know When a Process Should be Automated 1. Current Process Time vs. Projected Process Time Time is one of the most important factors to consider when deciding whether a process should be automated or not. A machine will perform most simple and repetitive processes faster than a person can. However, it is not only the individual process itself that should be considered, but the surrounding processes as well. 2. Accuracy Requirements Accuracy is another important factor to consider when a process should be automated. If machines are installed, maintained and programmed correctly, they will perform the same task, the same way,...
发表评论
阅读全文

How Does the Powder Filling and Sealing Machine Work?

Today, we will delve into the process of packaging powder products into pre-made bags using a pouch filling and sealing machine. The  Powder Packing Machine  mainly accomplishes two things: distributing the product into prefabricated bags, and then sealing the bags. There are two main designs of this machine type: rotary and in-line. The difference between the two lies in the machine layout.                   Powder Packing Machine The rotary bag packaging machine is arranged in a circular pattern, which means that the starting point of the packaging process is right next to the end point. This creates a better ergonomic setting for the operator and requires a minimal footprint. Since they are very popular in powder packaging, we will only take a closer look at the rotary design in this article. The rotary bag filling and sealing machine can be equipped with one-bag, two-bag or four-bag feeding "channels", among which the simplex (s...
发表评论
阅读全文